Page 276 - techequipmentscatalogue2016
P. 276
UKE ®
717 1718/718Ex 1719/719Pro
Pressure Calibrators
Pump up the pressure
717 Pressure Calibrators 719 Electric Pressure Calibrator
• Measure pressure, 0.025% of full scale Same features as Fluke 717 plus:
• Electric pump for one handed operation
with internal sensor • rnA source for calibrating I!P devices
- V8 NPT pressure fitting
- Compatible with non-corrosive gasses and 4-20 rnA VO
• Best in class pressure measurement
and liquids
• Pressure measurement to 690 bar accuracy of 0.025%
• Wide range of selectable measurement • Programmable pump limit settings can
units for pressure eliminate overpressurization - set 'pump
• Current measurement with 0.015% to' pressure values
accuracy and O.OOlrnA resolution 719Pro Electric Pressure Cahbrator
• Simultaneous pressure and current Same features as Fluke 717 and 719 plus:
• Measure both rnA (24rnA) andVdc (30V),
measurement for easy P/I testing
• 24 volt loop power supply source/simulate up to 24rnA
• Zero, Min-Max, Hold and Damping • Precision temperature measurement
functions (-50 to 150'C) with optional RID probe
• Pressure switch test captures set, reset • Included fluid trap to mitigate chance of
and deadband values of fluid damage
718 Pressure Calibrators
Same features as Fluke 717 plus:
• Newly designed built-in pressure/
vacuum hand pump with vernier and
bleed valve helps protect the pump from
damage and is easier to clean
Specifications
Fluke 717 10000G Pressure Calibrator 0.05%of range
270 For Fluke 717n18n19 models: Supported Pressure Safety: CSA C22.2 No. 1010.1:1992
Units; psi. in. H,O(4' C). in. H,O(20' C). cm ~p {4'C). cm EMC: EN50082-1:1992 and EN55022:1994 Class B
H,O(20' C). bar mBar. kPa. inHg. mmHg. kgtcm2 Fluke 717: For use with non corrosive gasses and liquids
Functions: Zero. Min. Max. Hold. Damp functions Fluke 718n19: For use with Dry Air only
Max. Voltage: 30 V Three Year Warranty (Pump one year)
Operating temperature: -10' C to 55' C
www.tech-equipments.comlsales@tech-equipments.com
717 1718/718Ex 1719/719Pro
Pressure Calibrators
Pump up the pressure
717 Pressure Calibrators 719 Electric Pressure Calibrator
• Measure pressure, 0.025% of full scale Same features as Fluke 717 plus:
• Electric pump for one handed operation
with internal sensor • rnA source for calibrating I!P devices
- V8 NPT pressure fitting
- Compatible with non-corrosive gasses and 4-20 rnA VO
• Best in class pressure measurement
and liquids
• Pressure measurement to 690 bar accuracy of 0.025%
• Wide range of selectable measurement • Programmable pump limit settings can
units for pressure eliminate overpressurization - set 'pump
• Current measurement with 0.015% to' pressure values
accuracy and O.OOlrnA resolution 719Pro Electric Pressure Cahbrator
• Simultaneous pressure and current Same features as Fluke 717 and 719 plus:
• Measure both rnA (24rnA) andVdc (30V),
measurement for easy P/I testing
• 24 volt loop power supply source/simulate up to 24rnA
• Zero, Min-Max, Hold and Damping • Precision temperature measurement
functions (-50 to 150'C) with optional RID probe
• Pressure switch test captures set, reset • Included fluid trap to mitigate chance of
and deadband values of fluid damage
718 Pressure Calibrators
Same features as Fluke 717 plus:
• Newly designed built-in pressure/
vacuum hand pump with vernier and
bleed valve helps protect the pump from
damage and is easier to clean
Specifications
Fluke 717 10000G Pressure Calibrator 0.05%of range
270 For Fluke 717n18n19 models: Supported Pressure Safety: CSA C22.2 No. 1010.1:1992
Units; psi. in. H,O(4' C). in. H,O(20' C). cm ~p {4'C). cm EMC: EN50082-1:1992 and EN55022:1994 Class B
H,O(20' C). bar mBar. kPa. inHg. mmHg. kgtcm2 Fluke 717: For use with non corrosive gasses and liquids
Functions: Zero. Min. Max. Hold. Damp functions Fluke 718n19: For use with Dry Air only
Max. Voltage: 30 V Three Year Warranty (Pump one year)
Operating temperature: -10' C to 55' C
www.tech-equipments.comlsales@tech-equipments.com
