Page 99 - techequipmentscatalogue2016
P. 99
EXTECH
===INSTRUMENTS
CAT IV 1000A Clamp Meter +
IR Thermometer
~ Bluetooth® Transmitter with METERLiNIC
Wirelessly transmits Voltage and Current readings to your FUR high-definition
infrared camera to incorporate meter readings with thermal images
Features: METER LiNK
8) Bluetooth"
• Built-in non-contact IR Thermometer design
with laser pointer METERLiNK frees the Thermographer
from the manual process of
• METERLiNK Wireless communication with FUR Thermal collecting field data
Imaging Cameras (b60, i60, B-Series, and T-Series)
Infrared cameras quickly locate problems
• CAT IV safety rating for industrial applications with electrical equipment
• True RMS Current and Voltage measurements Collecting current measurements and
• Peak hold captures inrush currents and Transients associating them with the right component
• 1.7" (43mm) jaw opening for conductors up to
identified on an infrared image. can be a
750MCM or two 500MCM complicated and cumbersome process
• 4000 count backlit display
• Autoranging with manual range button
• Data Hold, MiniMax and Auto Power off
• Complete with CAT IV test leads, 9V battery, general
purpose Type K probe, pouch case, and Professional
Test Lead Set
CAT IV -600V safety rating for added pOinter is an excellent troubleshooter for Manual data collection results in unnecessary
protection and True RMS feature gives locating hot spots and overheating motors. complexity and risk. METERLiNK eliminates this
you accurate readings of non-sinusoidal problem by allowing the thermographer to quickly
waveforms. take a current reading on an electrical target and
associate those readings with the corresponding
targets stored in an infrared image
Specifications Range Basic Accuracy
AC/DC Current
AC/DC VoltagL 0.1 to 1000A ±2.8%
Resistance
O.lmV to 1000V AC: ±1.5%; DC: ±2.8%
Ca~itance
Professional Test Leads: 0.1 to 40MQ ± 1.5%
Frequency
" 8-Piece Professional Test Lead set IR Temperature 0.001 nF to 40 , 000~F ±3.0%
" Two 42" (1 m) PVC lead extensions with shrouded banana Type K Temperature
Continuity 0.001 kHz to 4kHz ± 1.5%
plugs at both ends Inrush
" Two modular 4" (102mm) Heavy Duty test probe handles Diode -58 to 518'F (-50 to 27~ ±2.0% rdg or ±4'F/±2'C
Dimensions/Weight
with 0.16" (4mm) banana plug tip -4 to 1400' F ~ to 760'C) ±~dg+9° F/5'C
" Two standard size, alligator clips with insulated rubber boot
" Two extra large, double-insulated, alligator clips with sharp Ves
teeth for piercing insulated wire. Jaws open to 0.8" (20mm) Ves
Ordering Information: Ves
EX845 ..................1DDDA AC/DC True RMS Clamp/DMM+IR Thermometer 10.6x4.3x2" (270xll OX50mm)/ 13.60z (386g)
Patented
www.tech-equipments.comlsales@tech-equipments.com 93
===INSTRUMENTS
CAT IV 1000A Clamp Meter +
IR Thermometer
~ Bluetooth® Transmitter with METERLiNIC
Wirelessly transmits Voltage and Current readings to your FUR high-definition
infrared camera to incorporate meter readings with thermal images
Features: METER LiNK
8) Bluetooth"
• Built-in non-contact IR Thermometer design
with laser pointer METERLiNK frees the Thermographer
from the manual process of
• METERLiNK Wireless communication with FUR Thermal collecting field data
Imaging Cameras (b60, i60, B-Series, and T-Series)
Infrared cameras quickly locate problems
• CAT IV safety rating for industrial applications with electrical equipment
• True RMS Current and Voltage measurements Collecting current measurements and
• Peak hold captures inrush currents and Transients associating them with the right component
• 1.7" (43mm) jaw opening for conductors up to
identified on an infrared image. can be a
750MCM or two 500MCM complicated and cumbersome process
• 4000 count backlit display
• Autoranging with manual range button
• Data Hold, MiniMax and Auto Power off
• Complete with CAT IV test leads, 9V battery, general
purpose Type K probe, pouch case, and Professional
Test Lead Set
CAT IV -600V safety rating for added pOinter is an excellent troubleshooter for Manual data collection results in unnecessary
protection and True RMS feature gives locating hot spots and overheating motors. complexity and risk. METERLiNK eliminates this
you accurate readings of non-sinusoidal problem by allowing the thermographer to quickly
waveforms. take a current reading on an electrical target and
associate those readings with the corresponding
targets stored in an infrared image
Specifications Range Basic Accuracy
AC/DC Current
AC/DC VoltagL 0.1 to 1000A ±2.8%
Resistance
O.lmV to 1000V AC: ±1.5%; DC: ±2.8%
Ca~itance
Professional Test Leads: 0.1 to 40MQ ± 1.5%
Frequency
" 8-Piece Professional Test Lead set IR Temperature 0.001 nF to 40 , 000~F ±3.0%
" Two 42" (1 m) PVC lead extensions with shrouded banana Type K Temperature
Continuity 0.001 kHz to 4kHz ± 1.5%
plugs at both ends Inrush
" Two modular 4" (102mm) Heavy Duty test probe handles Diode -58 to 518'F (-50 to 27~ ±2.0% rdg or ±4'F/±2'C
Dimensions/Weight
with 0.16" (4mm) banana plug tip -4 to 1400' F ~ to 760'C) ±~dg+9° F/5'C
" Two standard size, alligator clips with insulated rubber boot
" Two extra large, double-insulated, alligator clips with sharp Ves
teeth for piercing insulated wire. Jaws open to 0.8" (20mm) Ves
Ordering Information: Ves
EX845 ..................1DDDA AC/DC True RMS Clamp/DMM+IR Thermometer 10.6x4.3x2" (270xll OX50mm)/ 13.60z (386g)
Patented
www.tech-equipments.comlsales@tech-equipments.com 93
