Page 241 - techequipmentscatalogue2016
P. 241
anced Signal Analysis Tektronix®
Oscilloscopes
/
Sampling Oscilloscopes
DP070000SX Series
DATA DATA
SHEET SHEET
2 or 4 analog channels Six modules support up to 8 single ended or 4 differential
channels and/or 2 optical channels
33 GHz to 70 GHz
Up to 70+ GHz Electrical bandwidth and 80+ Optical bandwidth
50 GS/s to 200 GS/s modules available with intrinsic jitter as low as <100 fs RMS
300 kS/s Maximum sample rate
Up to lGpoints 50 to 16,000 per channel native record length; with up to 1M
points when using available IConnect Signal Integrity Software,
Pinpoint " Triggering, Edge, Glitch, 10M samples (lOOk unit intervals, 100 samples per unit interval)
Pulse Width, Runt, Time-out, when equipped with available OOSJNB Jitter, Noise and BER
Transition , Setup/Hold, Pattern, Analysis software
State, Window, Trigger Delay (by
Time and by Event), Visual Trigger' Clock Input/Prescale Trigger, TOR clock (generated intemally),
Clock Recovery from Optical Sampling modules and Electrical
' O pti onal Clock Recovery modules, and Phase Reference time base
supports acquisitions Free Run mode and Trigger Direct Input for
<100 fs RMS intrinsic jitter typical
80SJNB Jitter, Noise, BER, and Serial Data Unk Analysis
Software; IConnect Signal Integrity Software
USB2.0/3.0 Host, LAN 3 USB 2.0 Port(s) connector on the front panel , 4 USB 2.0 Ports
(10/100/1 000 Base-T Ethernet, LXI on the rear panel; LAN PORT, RJ-45 connector, supports
Class C Compliant), DVI, VGA 10BASE-T, 100BASE-T, 1oooBASE-T on rear panel; 1 Serial Port,
DB-9 COM1, COM2 ports; 1 DVI IEEE488.2 connector on rear
panel; 1 DVI connector, female on rear panel, DVI to VGA 15-pin
D-sub connector adapter provided; PS2 Serial Ports Mouse and
keyboard inputs; Audio Ports 118 in. microphone input and line
output
53 Automated Measurements, Over 120 automated measurements include RZ,NRZ, and pulse
Waveform and Screen Cursors, signal types, and the following measurement types, plus 8 math
Arithmetic and Advanced Waveform waveforms using the following math functions: Add, Subtract,
Math, FFT, Measurement Statistics, Multiply, DMde, Average, Differentiate, Exponential, Integrate,
Waveform Histograms Natural Log, Log, Magnitude,Min, Max, Square Root, and Filter. In
addition, measurement values can be utilized as scalars in math
Optional: waveform definitions; Mask support for many applications,
standard masks are available as predefined, built- in masks;
DPOJET Advanced Jitter and Eye Automated Masked Margin based on Mask Hit Ratio as required
Diagram Analysis; SignalVu Vector by many standards.
Signal Analysis; Serial Data Unk
Analysis
Optional: Windows'" 7 Ultimate (32-bit) Operating System; IConnect Signal
TekScope Anywhere" Integrity Software for frequency domain analysis, S-parameter
measurements, and impedance characterization 80SJNB Jitter,
Noise, BER, and Serial Unk analysis including Cross-Talk aware TJ
(BUJ); 80SJARB Jitter Analysis of Arbitrary Data with J2-J9
measurements, and support for pattern lengths to PRBS31
Battery Operation
• Increase bandwidth • Modular architecture lets you add channels or bandwidth
• Upgrade older platforms to the • Add TDR, optical and electrical standards support
latest platforms • Add advanced analysis, compliance test, frequency domain
• Add extended record length, up to analysis software
1 Gpoints • Add clock recovery trigger pickoff (CRTP) to select optical
• Add measurements and analysis modules
Oitter, DDR, mask, RF)
• Enhance system jitter floor performance to <100 fs RMS
www.tech-equipments.comlsales@tech-equipments.com 235
Oscilloscopes
/
Sampling Oscilloscopes
DP070000SX Series
DATA DATA
SHEET SHEET
2 or 4 analog channels Six modules support up to 8 single ended or 4 differential
channels and/or 2 optical channels
33 GHz to 70 GHz
Up to 70+ GHz Electrical bandwidth and 80+ Optical bandwidth
50 GS/s to 200 GS/s modules available with intrinsic jitter as low as <100 fs RMS
300 kS/s Maximum sample rate
Up to lGpoints 50 to 16,000 per channel native record length; with up to 1M
points when using available IConnect Signal Integrity Software,
Pinpoint " Triggering, Edge, Glitch, 10M samples (lOOk unit intervals, 100 samples per unit interval)
Pulse Width, Runt, Time-out, when equipped with available OOSJNB Jitter, Noise and BER
Transition , Setup/Hold, Pattern, Analysis software
State, Window, Trigger Delay (by
Time and by Event), Visual Trigger' Clock Input/Prescale Trigger, TOR clock (generated intemally),
Clock Recovery from Optical Sampling modules and Electrical
' O pti onal Clock Recovery modules, and Phase Reference time base
supports acquisitions Free Run mode and Trigger Direct Input for
<100 fs RMS intrinsic jitter typical
80SJNB Jitter, Noise, BER, and Serial Data Unk Analysis
Software; IConnect Signal Integrity Software
USB2.0/3.0 Host, LAN 3 USB 2.0 Port(s) connector on the front panel , 4 USB 2.0 Ports
(10/100/1 000 Base-T Ethernet, LXI on the rear panel; LAN PORT, RJ-45 connector, supports
Class C Compliant), DVI, VGA 10BASE-T, 100BASE-T, 1oooBASE-T on rear panel; 1 Serial Port,
DB-9 COM1, COM2 ports; 1 DVI IEEE488.2 connector on rear
panel; 1 DVI connector, female on rear panel, DVI to VGA 15-pin
D-sub connector adapter provided; PS2 Serial Ports Mouse and
keyboard inputs; Audio Ports 118 in. microphone input and line
output
53 Automated Measurements, Over 120 automated measurements include RZ,NRZ, and pulse
Waveform and Screen Cursors, signal types, and the following measurement types, plus 8 math
Arithmetic and Advanced Waveform waveforms using the following math functions: Add, Subtract,
Math, FFT, Measurement Statistics, Multiply, DMde, Average, Differentiate, Exponential, Integrate,
Waveform Histograms Natural Log, Log, Magnitude,Min, Max, Square Root, and Filter. In
addition, measurement values can be utilized as scalars in math
Optional: waveform definitions; Mask support for many applications,
standard masks are available as predefined, built- in masks;
DPOJET Advanced Jitter and Eye Automated Masked Margin based on Mask Hit Ratio as required
Diagram Analysis; SignalVu Vector by many standards.
Signal Analysis; Serial Data Unk
Analysis
Optional: Windows'" 7 Ultimate (32-bit) Operating System; IConnect Signal
TekScope Anywhere" Integrity Software for frequency domain analysis, S-parameter
measurements, and impedance characterization 80SJNB Jitter,
Noise, BER, and Serial Unk analysis including Cross-Talk aware TJ
(BUJ); 80SJARB Jitter Analysis of Arbitrary Data with J2-J9
measurements, and support for pattern lengths to PRBS31
Battery Operation
• Increase bandwidth • Modular architecture lets you add channels or bandwidth
• Upgrade older platforms to the • Add TDR, optical and electrical standards support
latest platforms • Add advanced analysis, compliance test, frequency domain
• Add extended record length, up to analysis software
1 Gpoints • Add clock recovery trigger pickoff (CRTP) to select optical
• Add measurements and analysis modules
Oitter, DDR, mask, RF)
• Enhance system jitter floor performance to <100 fs RMS
www.tech-equipments.comlsales@tech-equipments.com 235
