Page 438 - techequipmentscatalogue2016
P. 438
Month and Product code. Glass! Glove size. lec live CE mark and
year of working
manufacture. category. symbol. notified
body number.
Area for lEG standard
marking first reference.
date of use and
subsequent test Manufacturer/ Manufacturers Voltage Product reference
dates . distributer. lot number. level used on CEtype
examination
certificate.
CE
-
Symbol appears
only on mechanical
gloves.
• Insulating rubber gloves should be chosen according to their class, • Insulating rubber gloves can have other environmental resistance
which corresponds the voltage level used. properties, and they are classified into categories.
Class DC DC Category Resisting in
00 500Veffective 750V A
0 1000Veffeclive 1500V H Acid
7500Veffective 11250 V Z Oil
2 17000Veffective 25500V R Ozone
26500Veffective 39750V C Acid, Oil, and Ozone
3 36000Veffeclive 54000 V Very low temperature
4
Note 1: Category Rcombines the characteri stics of Categories A. H. andZ.
Note 2: Any category combination may be used.
Inspection and Storage of Insulating Gloves
All insulating gloves must be visible inspected after inflation and be used without having been tested within the last six months.
before each use. Nonmal testing periods are between 30 and 90 days.
For Classes 0 and 00: The tests consist of An inspection of the inside of the gloves is also recommended.
an air inflation test and avisual inspection Gloves should be stored in their packaging,without being
when the glove is inflated.The dielectric test compressed or folded. They should not be stored near a heat
is not required, but it may be performed at the owner's request.
For Classes 1, 2, 3, and 4: Even when in storage,aglove should source with atemperature of 10 to 21 ce.
432 www.tech-equipments.comlsales@tech-equipments.com
year of working
manufacture. category. symbol. notified
body number.
Area for lEG standard
marking first reference.
date of use and
subsequent test Manufacturer/ Manufacturers Voltage Product reference
dates . distributer. lot number. level used on CEtype
examination
certificate.
CE
-
Symbol appears
only on mechanical
gloves.
• Insulating rubber gloves should be chosen according to their class, • Insulating rubber gloves can have other environmental resistance
which corresponds the voltage level used. properties, and they are classified into categories.
Class DC DC Category Resisting in
00 500Veffective 750V A
0 1000Veffeclive 1500V H Acid
7500Veffective 11250 V Z Oil
2 17000Veffective 25500V R Ozone
26500Veffective 39750V C Acid, Oil, and Ozone
3 36000Veffeclive 54000 V Very low temperature
4
Note 1: Category Rcombines the characteri stics of Categories A. H. andZ.
Note 2: Any category combination may be used.
Inspection and Storage of Insulating Gloves
All insulating gloves must be visible inspected after inflation and be used without having been tested within the last six months.
before each use. Nonmal testing periods are between 30 and 90 days.
For Classes 0 and 00: The tests consist of An inspection of the inside of the gloves is also recommended.
an air inflation test and avisual inspection Gloves should be stored in their packaging,without being
when the glove is inflated.The dielectric test compressed or folded. They should not be stored near a heat
is not required, but it may be performed at the owner's request.
For Classes 1, 2, 3, and 4: Even when in storage,aglove should source with atemperature of 10 to 21 ce.
432 www.tech-equipments.comlsales@tech-equipments.com
