|
Kyoritsu KEW 8130 Clamp Sensor
110mm
Can measure AC current up to 1000A
Flexible and light weight by the air core coil used at the sensor part
Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V
| Applicable model | *5010 *5020 6305 6315 |
|---|
* When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
| Conductor size | max.110mm |
|---|---|
| Rated current | AC 1000A |
| Output voltage | AC 500mV / 1000A (AC 0.5mV/A) |
| Accuracy | .8%rdg.2mV (45Hz - 65Hz) .5%rdg.4mV (40Hz - 1kHz) |
| Phase shift | within .0(45Hz - 65Hz) |
| Cable length | Approx. 3m |
| Output connector | MINI DIN 6PIN |
| Output impedance | 100or less |
| Applicable standards | IEC 61010-1, IEC 61010-2-030, IEC 61010-2-032 CAT IV 300V / CAT III 600V Pollution degree 2, IEC 61326 |
| Operating temperature & humidity range | -10 - 50, relative humidity 85% or less (no condensation) |
| Weight | Approx. 180g |
| Included Accessories | Instruction manual, Cable marker, 9095 (Carrying case) |