|
Gossen Metrawatt SINEAX V624 Temp. Transducer, RTD/TC Inputs, with Electr. Isolation, Ex/NEx
The SINEAX V624 converts measured quantities (i.e. signal from a thermocouple or a resistance thermometer) into a proportional, analog output quantity.
- Measured quantity and measuring range can be programmed with a PC: facilitates planning and project work, short lead-times, minimal inventory
- Integrated cold junction compensation
- Electrically isolated between input, 2.3 kV output and 3.7 kV auxiliary power / compliant with EN 61 010
- Power supply: integrated AC-DC power pack with large tolerance range
- Open-circuit sensor and short-circuit monitoring / defined output performance in the event of disturbance
- With or without programmable auxiliary power connection
- The following parameters can also be programmed: data related to the measured quantity (e.g. 2, 3 or 4-wire connection for resistance thermometer, "internal" or "external" cold junction compensation for thermocouple etc.), response characteristics, signal flow direction (measured quantity / output quantity "rising/rising, normal" or "rising/falling, inverse" and details regarding open-circuit sensor monitoring (output quantity as a predetermined fixed value between -10 and 110%) / greatest possible flexibility for the realization of measuring tasks
- Output calibration, lower and upper value can be trimmed via software
- Digital measured value information available at the programming interface: facilitates initial start-up, measured values can be displayed at the programming PC
- Available with "intrinsically safe" explosion protection per [EEx ia] IIC
- Serial interface
- P12 housing for top-hat rail mounting